Home automation installation A home that responds to you.
Lights, shades, climate, audio, locks and security working from one simple control. We design it, wire it and program it so it fits how you live, and keeps working.
What it looks like
What we do
Design, wire, program, support.
- Whole-home control design around how you live
- Lighting control and dimming, with correct switching for motor loads
- Motorized shades tied to time of day or scenes
- Multi-room audio and music streaming
- Climate control integration
- Door lock, garage door and gate integration
- Alarm integration: arm, disarm and status from the same screen
- Pre-wire during construction and renovations
- Support and changes after the install
How we help you
Convenience without the clutter.
- One app or panel instead of a different app for every device
- "Good night", "Away" and "Welcome home" scenes that run in one tap
- Lights and shades that follow the time of day
- Lower energy waste, because rooms are not heated or lit when empty
- See the lock and alarm status before you leave the house
- A reliable network behind it, so automation does not drop out
Try it
One tap, the whole house.
Pick a scene and watch what changes.
Lights: On 60%
Shades: Open
Climate: 21 C
Front door: Unlocked
Alarm: Disarmed
Music: Kitchen
The pieces
Everything a home runs on, in one system.
RTI and Control4
The brain and the touch panels, remotes and apps you use every day. We are an RTI dealer and also install Control4.
Russound and WiiM
Multi-room music and streaming, with each room controlled separately.
Switching and motors
Dimmers and relays chosen for the load, so fans, fireplaces and furnace circuits are switched properly and safely.
Alarm and lock integration
Arm or check the alarm and see lock status from the same control. Works with our DSC and Qolsys alarm systems.
Doors, gates and garage
Door entry, garage and gate control that fit into scenes like "Away" or "Welcome home".
UniFi backbone
Automation is only as reliable as the network. We build it on the same UniFi standard we use for businesses.
How a project works
Planned room by room, tested before handover.
Brands we install
Home automation FAQ
Do I need to rebuild my home to automate it?
No. We can work with existing equipment in many homes. New builds and renovations are easier and less expensive because we can pre-wire while walls are open.
Will it keep working if the internet goes down?
Local control, such as lights and scenes, is designed to keep working. Features that rely on the cloud, such as remote access, need internet.
Can you add to an existing system?
Often, yes. We assess what you have first, then tell you honestly what can be extended and what is better replaced.
Are smart locks and mortise handlesets supported?
It depends on the lock. We check compatibility before quoting, because some locks cannot be integrated.
Can fans and furnace circuits be controlled?
Yes, with correctly rated switching. We flag these loads during the walk-through, before choosing dimmers.
Can I control it when I am away?
Yes, through the control system app, subject to the remote-access plan for your equipment.
More from Pride
Explore our other solutions.
Let's make your home work for you.
Walk us through your day and we will show you what automation can take off your plate.
Request a free consultation(855) 579-6700